Product classification

• Regional Availability: Asia | Australia/New Zealand | EMEA | Latin America | North America
• Portfolio: SYSTIMAX®
• Product Type: Twisted pair patch cord
• Product Brand: GigaSPEED X10D®
• Product Series: CON | CPC | UTG
• Ordering Note: Cords < 1 m are valid elements for use in a channel or as an equipment interconnect but due to their limited length are not guaranteed to meet component compliance requirements that were developed to assess the quality of longer cords | Cords > 1 m are authorized for use in channels and are an effective standalone method used to connect active devices

General Specifications

• ANSI/TIA Category: 6A
• Cable Type: U/UTP (unshielded)
• Conductor Type: Solid
• Interface, Connector A: RJ45 plug
• Interface Feature, connector A: Standard
• Interface, Connector B: RJ45 plug
• Interface Feature, connector B: Standard
• Jacket Color: Black | Blue | Dark gray | Light blue | Lilac | Orange | Pink | Red | Spring green | White | Yellow | Purple/Violet | Slate/Gray
• Pairs, quantity: 4
• Transmission Standards: ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA
• Wiring: T568B

Dimensions

• Cable Assembly Length Range (m): 1 – 30
• Cable Assembly Length Range (ft): 1 – 100
• Cable Assembly Length Range (cm): 15 – 999
• Cable Assembly Length Range (in): 6 – 999
• Diameter Over Jacket: 7.24 mm | 0.285 in
• Compatible Conductor Gauge, solid: 24 AWG

Electrical Specifications

• Contact Resistance, maximum: 20 mOhm
• Current Rating at Temperature: 1.5 A @ 20 °C | 1.5 A @ 68 °F
• dc Resistance, maximum: 0.3 ohm
• Dielectric Withstand Voltage, RMS, contact-to-contact: 1,000 Vac @ 60 Hz
• Insulation Resistance, minimum: 500 MOhm
• Remote Powering: Fully supports the safe delivery of power over LAN cabling described by IEEE 802.3bt (Type 4) and complies with the unmating under electrical load requirements prescribed by IEC 60512-99-002
• PoE Durability: Supports IEEE 802.3bt Type 4 (90 W) applications greater than 3000 plug to jack mating cycles

Material Specifications

• Conductor Material: Bare copper
• Contact Plating Material: Gold over nickel
• Plug Contact Material: Phosphor Bronze
• Plug Housing Material: Polycarbonate clear
• Jacket Material: Polyvinyl Chloride

Mechanical Specifications

• Plug Retention Force, minimum: 133 N | 29.9 lbf
• Plug to Jack Mating Cycles: Complies to IEC 60603-7 series

Environmental Specifications

• Operating Temperature: -10 °C to +60 °C (+14 °F to +140 °F)
• Storage Temperature: -40 °C to +70 °C (-40 °F to +158 °F)
• Environmental Space: Non-plenum
• Flammability Rating: UL 94 V-0
• Safety Standard: ETL | cETL | Anatel

Regulatory Compliance/Certifications

• Agency: Classification
• CHINA-ROHS: Below maximum concentration value
• ISO 9001:2015: Designed, manufactured and/or distributed under this quality management system
• REACH-SVHC: Compliant as per SVHC revision on www.commscope.com/ProductCompliance
• ROHS: Compliant
• UK-ROHS: Compliant